Experimental Verification of the Impact of Radial Internal Clearance on a Bearing's Dynamics

Bartlomiej Ambrozkiewicz; Arkadiusz Syta; Anthimos Georgiadis; Alexander Gassner; Nicolas Meier

doi:10.3390/s22176366

Experimental Verification of the Impact of Radial Internal Clearance on a Bearing's Dynamics

Bartlomiej Ambrozkiewicz
, Arkadiusz Syta
, Anthimos Georgiadis
, Alexander Gassner
, Nicolas Meier

Research output: Journal contributions › Journal articles › Research › peer-review

6 Citations (Scopus)

Abstract

This paper focuses on the influence of radial internal clearance on the dynamics of a rolling-element bearing. In the beginning, the 2—Degree of Freedom (DOF) model was studied, in which the clearance was treated as a bifurcation parameter. The derived nonlinear mathematical model is based on Hertzian contact theory and takes into consideration shape errors of rolling surfaces and eccentricity reflecting real operating conditions. The analysis showed characteristic dynamical behavior by specific clearance range, which reflects others in a low or high amplitude and can refer to the optimal clearance. The experimental validation was conducted with the use of a double row self-aligning ball bearing (SABB) NTN 2309SK in which the acceleration response was measured by various rotational velocities. The time series obtained from the mathematical model and the experiment were analyzed with the recurrence quantification analysis.

Original language	English
Article number	6366
Journal	Sensors
Volume	22
Issue number	17
Number of pages	20
ISSN	1424-8239
DOIs	https://doi.org/10.3390/s22176366
Publication status	Published - 01.09.2022

Bibliographical note

Funding Information:
The project/research was financed in the framework of the project Lublin University of Technology—Regional Excellence Initiative, funded by the Polish Ministry of Science and Higher Education (contract no. 030/RID/2018/19).

Publisher Copyright:
© 2022 by the authors.

Research areas and keywords

ball bearings
nonlinear mathematical model
experimental verification
recurrence analysis
Engineering

ASJC Scopus Subject Areas

Instrumentation
Biochemistry
Analytical Chemistry
Atomic and Molecular Physics, and Optics
Electrical and Electronic Engineering
Information Systems

Access to Document

10.3390/s22176366Licence: CC BY

Entwicklung eines Messstandes zur automatisierten Messung der radialen Lagerluft von Wälzlagern
Meier, N., 05.06.2018, 1 ed. Göttingen: Sierke Verlag. 90 p. (Schriftenreihe zur Produkt- und Prozessinnovation; vol. 13)
Research output: Books and anthologies › Monographs › Research › peer-review

Cite this

@article{20b7153c8885478391f9536288045c60,

title = "Experimental Verification of the Impact of Radial Internal Clearance on a Bearing's Dynamics",

abstract = "This paper focuses on the influence of radial internal clearance on the dynamics of a rolling-element bearing. In the beginning, the 2—Degree of Freedom (DOF) model was studied, in which the clearance was treated as a bifurcation parameter. The derived nonlinear mathematical model is based on Hertzian contact theory and takes into consideration shape errors of rolling surfaces and eccentricity reflecting real operating conditions. The analysis showed characteristic dynamical behavior by specific clearance range, which reflects others in a low or high amplitude and can refer to the optimal clearance. The experimental validation was conducted with the use of a double row self-aligning ball bearing (SABB) NTN 2309SK in which the acceleration response was measured by various rotational velocities. The time series obtained from the mathematical model and the experiment were analyzed with the recurrence quantification analysis.",

keywords = "ball bearings, nonlinear mathematical model, experimental verification, recurrence analysis, Engineering",

author = "Bartlomiej Ambrozkiewicz and Arkadiusz Syta and Anthimos Georgiadis and Alexander Gassner and Nicolas Meier",

note = "Funding Information: The project/research was financed in the framework of the project Lublin University of Technology—Regional Excellence Initiative, funded by the Polish Ministry of Science and Higher Education (contract no. 030/RID/2018/19). Publisher Copyright: {\textcopyright} 2022 by the authors.",

year = "2022",

month = sep,

day = "1",

doi = "10.3390/s22176366",

language = "English",

volume = "22",

journal = "Sensors",

issn = "1424-8239",

publisher = "MDPI AG",

number = "17",

}

TY - JOUR

T1 - Experimental Verification of the Impact of Radial Internal Clearance on a Bearing's Dynamics

AU - Ambrozkiewicz, Bartlomiej

AU - Syta, Arkadiusz

AU - Georgiadis, Anthimos

AU - Gassner, Alexander

AU - Meier, Nicolas

N1 - Funding Information: The project/research was financed in the framework of the project Lublin University of Technology—Regional Excellence Initiative, funded by the Polish Ministry of Science and Higher Education (contract no. 030/RID/2018/19). Publisher Copyright: © 2022 by the authors.

PY - 2022/9/1

Y1 - 2022/9/1

N2 - This paper focuses on the influence of radial internal clearance on the dynamics of a rolling-element bearing. In the beginning, the 2—Degree of Freedom (DOF) model was studied, in which the clearance was treated as a bifurcation parameter. The derived nonlinear mathematical model is based on Hertzian contact theory and takes into consideration shape errors of rolling surfaces and eccentricity reflecting real operating conditions. The analysis showed characteristic dynamical behavior by specific clearance range, which reflects others in a low or high amplitude and can refer to the optimal clearance. The experimental validation was conducted with the use of a double row self-aligning ball bearing (SABB) NTN 2309SK in which the acceleration response was measured by various rotational velocities. The time series obtained from the mathematical model and the experiment were analyzed with the recurrence quantification analysis.

AB - This paper focuses on the influence of radial internal clearance on the dynamics of a rolling-element bearing. In the beginning, the 2—Degree of Freedom (DOF) model was studied, in which the clearance was treated as a bifurcation parameter. The derived nonlinear mathematical model is based on Hertzian contact theory and takes into consideration shape errors of rolling surfaces and eccentricity reflecting real operating conditions. The analysis showed characteristic dynamical behavior by specific clearance range, which reflects others in a low or high amplitude and can refer to the optimal clearance. The experimental validation was conducted with the use of a double row self-aligning ball bearing (SABB) NTN 2309SK in which the acceleration response was measured by various rotational velocities. The time series obtained from the mathematical model and the experiment were analyzed with the recurrence quantification analysis.

KW - ball bearings

KW - nonlinear mathematical model

KW - experimental verification

KW - recurrence analysis

KW - Engineering

UR - https://www.scopus.com/pages/publications/85137850964

UR - https://www.mendeley.com/catalogue/a010ec71-1407-3bf2-92e8-91f75ef8810b/

U2 - 10.3390/s22176366

DO - 10.3390/s22176366

M3 - Journal articles

C2 - 36080826

SN - 1424-8239

VL - 22

JO - Sensors

JF - Sensors

IS - 17

M1 - 6366

ER -

Experimental Verification of the Impact of Radial Internal Clearance on a Bearing's Dynamics

Abstract

Bibliographical note

Research areas and keywords

ASJC Scopus Subject Areas

Access to Document

Fingerprint

Research output

Entwicklung eines Messstandes zur automatisierten Messung der radialen Lagerluft von Wälzlagern

Cite this