In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy

D. Tolnai; S. Gavras; A. Stark; M. Bartosch; F. Witte; Nobert Hort

doi:10.1007/978-3-030-92533-8_23

In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy

D. Tolnai^*
, S. Gavras
, A. Stark
, M. Bartosch
, F. Witte
, Nobert Hort

^*Korrespondierende/r Autor/-in für diese Arbeit

Publikation: Beiträge in Sammelwerken › Aufsätze in Konferenzbänden › Forschung › Begutachtung

1 Zitat (Scopus)

Abstract

The combination of Y and Zn as alloying addition is an effective way to improve the property profile of Mg. In addition to structural applications, these types of alloys can be used as temporary implants due to their biocompatibility and degradation under physiological conditions. In situ synchrotron radiation diffraction was performed during tension and compression of an extruded Mg–2Y–1Zn–1Mn alloy at room temperature, at 200 °C and at 350 °C, respectively, up to a deformation of 0.3 with a deformation rate of 10^–3 s⁻¹. The results enable to identify at different temperatures whether crystallographic slip, twinning, and dynamic recrystallization take place to accommodate strain, and which one of those has the dominant role during different stages of deformation. Furthermore, the asymmetry between tensile and compression load is evaluated as an important factor for the further processing of the material.

Originalsprache	Englisch
Titel	Magnesium Technology 2022
Redakteure/-innen	Petra Maier, Steven Barela, Victoria M. Miller, Neale R. Neelameggham
Seitenumfang	6
Erscheinungsort	Cham
Herausgeber (Verlag)	Springer Schweiz
Erscheinungsdatum	01.01.2022
Seiten	143-148
ISBN (Print)	978-3-030-92532-1, 978-3-030-92535-2
ISBN (elektronisch)	978-3-030-92533-8
DOIs	https://doi.org/10.1007/978-3-030-92533-8_23
Publikationsstatus	Erschienen - 01.01.2022
Veranstaltung	TMS 2022 Annual Meeting & Exhibition - Anaheim Convention Center & Anaheim Marriott, Anaheim, USA / Vereinigte Staaten Dauer: 27.02.2022 → 03.03.2022 https://www.tms.org/AnnualMeeting/TMS2022

Fachgebiete und Schlagwörter

Ingenieurwissenschaften

Zugriff auf Dokument

10.1007/978-3-030-92533-8_23

Dieses zitieren

Tolnai, D., Gavras, S., Stark, A., Bartosch, M., Witte, F., & Hort, N. (2022). In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy. in P. Maier, S. Barela, V. M. Miller, & N. R. Neelameggham (Hrsg.), Magnesium Technology 2022 (S. 143-148). (Minerals, Metals and Materials Series). Springer Schweiz. https://doi.org/10.1007/978-3-030-92533-8_23

@inbook{f6d3fab5dfe041abaf62e9f3c190fae7,

title = "In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy",

abstract = "The combination of Y and Zn as alloying addition is an effective way to improve the property profile of Mg. In addition to structural applications, these types of alloys can be used as temporary implants due to their biocompatibility and degradation under physiological conditions. In situ synchrotron radiation diffraction was performed during tension and compression of an extruded Mg–2Y–1Zn–1Mn alloy at room temperature, at 200 °C and at 350 °C, respectively, up to a deformation of 0.3 with a deformation rate of 10–3 s−1. The results enable to identify at different temperatures whether crystallographic slip, twinning, and dynamic recrystallization take place to accommodate strain, and which one of those has the dominant role during different stages of deformation. Furthermore, the asymmetry between tensile and compression load is evaluated as an important factor for the further processing of the material.",

keywords = "In situ deformation, Mg–Y–Zn–Mn alloys, Synchrotron radiation diffraction, Thermomechanical response, WZM211, Engineering",

author = "D. Tolnai and S. Gavras and A. Stark and M. Bartosch and F. Witte and Nobert Hort",

year = "2022",

month = jan,

day = "1",

doi = "10.1007/978-3-030-92533-8\_23",

language = "English",

isbn = "978-3-030-92532-1",

series = "Minerals, Metals and Materials Series",

publisher = "Springer Schweiz",

pages = "143--148",

editor = "Petra Maier and Steven Barela and Miller, \{Victoria M.\} and Neelameggham, \{Neale R.\}",

booktitle = "Magnesium Technology 2022",

address = "Switzerland",

note = "TMS 2022 Annual Meeting \& Exhibition ; Conference date: 27-02-2022 Through 03-03-2022",

url = "https://www.tms.org/AnnualMeeting/TMS2022",

}

Tolnai, D, Gavras, S, Stark, A, Bartosch, M, Witte, F & Hort, N 2022, In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy. in P Maier, S Barela, VM Miller & NR Neelameggham (Hrsg.), Magnesium Technology 2022. Minerals, Metals and Materials Series, Springer Schweiz, Cham, S. 143-148, TMS 2022 Annual Meeting & Exhibition, Anaheim, California, USA / Vereinigte Staaten, 27.02.22. https://doi.org/10.1007/978-3-030-92533-8_23

In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy. / Tolnai, D.; Gavras, S.; Stark, A. et al.
Magnesium Technology 2022. Hrsg. / Petra Maier; Steven Barela; Victoria M. Miller; Neale R. Neelameggham. Cham: Springer Schweiz, 2022. S. 143-148 (Minerals, Metals and Materials Series).

Publikation: Beiträge in Sammelwerken › Aufsätze in Konferenzbänden › Forschung › Begutachtung

TY - CHAP

T1 - In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy

AU - Tolnai, D.

AU - Gavras, S.

AU - Stark, A.

AU - Bartosch, M.

AU - Witte, F.

AU - Hort, Nobert

PY - 2022/1/1

Y1 - 2022/1/1

N2 - The combination of Y and Zn as alloying addition is an effective way to improve the property profile of Mg. In addition to structural applications, these types of alloys can be used as temporary implants due to their biocompatibility and degradation under physiological conditions. In situ synchrotron radiation diffraction was performed during tension and compression of an extruded Mg–2Y–1Zn–1Mn alloy at room temperature, at 200 °C and at 350 °C, respectively, up to a deformation of 0.3 with a deformation rate of 10–3 s−1. The results enable to identify at different temperatures whether crystallographic slip, twinning, and dynamic recrystallization take place to accommodate strain, and which one of those has the dominant role during different stages of deformation. Furthermore, the asymmetry between tensile and compression load is evaluated as an important factor for the further processing of the material.

AB - The combination of Y and Zn as alloying addition is an effective way to improve the property profile of Mg. In addition to structural applications, these types of alloys can be used as temporary implants due to their biocompatibility and degradation under physiological conditions. In situ synchrotron radiation diffraction was performed during tension and compression of an extruded Mg–2Y–1Zn–1Mn alloy at room temperature, at 200 °C and at 350 °C, respectively, up to a deformation of 0.3 with a deformation rate of 10–3 s−1. The results enable to identify at different temperatures whether crystallographic slip, twinning, and dynamic recrystallization take place to accommodate strain, and which one of those has the dominant role during different stages of deformation. Furthermore, the asymmetry between tensile and compression load is evaluated as an important factor for the further processing of the material.

KW - In situ deformation

KW - Mg–Y–Zn–Mn alloys

KW - Synchrotron radiation diffraction

KW - Thermomechanical response

KW - WZM211

KW - Engineering

UR - https://www.scopus.com/pages/publications/85125279889

UR - https://www.mendeley.com/catalogue/2757daa0-1ed6-3dc9-86a3-b814532a6275/

U2 - 10.1007/978-3-030-92533-8_23

DO - 10.1007/978-3-030-92533-8_23

M3 - Article in conference proceedings

AN - SCOPUS:85125279889

SN - 978-3-030-92532-1

SN - 978-3-030-92535-2

T3 - Minerals, Metals and Materials Series

SP - 143

EP - 148

BT - Magnesium Technology 2022

A2 - Maier, Petra

A2 - Barela, Steven

A2 - Miller, Victoria M.

A2 - Neelameggham, Neale R.

PB - Springer Schweiz

CY - Cham

T2 - TMS 2022 Annual Meeting & Exhibition

Y2 - 27 February 2022 through 3 March 2022

ER -

Tolnai D, Gavras S, Stark A, Bartosch M, Witte F, Hort N. In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy. in Maier P, Barela S, Miller VM, Neelameggham NR, Hrsg., Magnesium Technology 2022. Cham: Springer Schweiz. 2022. S. 143-148. (Minerals, Metals and Materials Series). doi: 10.1007/978-3-030-92533-8_23

In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy

Abstract

Fachgebiete und Schlagwörter

Zugriff auf Dokument

Fingerprint

Dieses zitieren