Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study

Tong Shen; Banglong Fu; Ting Chen; Uceu Suhuddin; Benjamin Klusemann

doi:10.21741/9781644903131-189

Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study

Tong Shen^*
, Banglong Fu
, Ting Chen
, Uceu Suhuddin
, Benjamin Klusemann

^*Korrespondierende/r Autor/-in für diese Arbeit

Helmholtz-Zentrum Hereon

Publikation: Beiträge in Sammelwerken › Aufsätze in Konferenzbänden › Forschung › Begutachtung

1 Zitat (Scopus)

Abstract

The main objective of this study was to assess and enhance the weldability of AA6016- T4 to AlSi-coated press-hardened steel (PHS), with a focus on investigating the impact of the AlSi coating on the mechanical properties of welded joints. Variations in tool rotation speed, dwell time, and plunge speed were performed to observe their effects on the joint behavior. It was observed that the protective AlSi-coating significantly influences the mechanical strength of the welded joint. Notably, the removal of the AlSi coating resulted in a substantial increase in joint mechanical strength. To systematically assess joint lap-shear strength under static loading conditions, Design of Experiment technique was employed. The influence of the process parameters on joint strength was thoroughly evaluated.

Originalsprache	Englisch
Titel	Material Forming, ESAFORM 2024 : The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024
Redakteure/-innen	Anna Carla Araujo, Arthur Cantarel, France Chabert, Adrian Korycki, Philippe Olivier, Fabrice Schmidt
Seitenumfang	9
Erscheinungsort	Millersville, PA
Herausgeber (Verlag)	Association of American Publishers
Erscheinungsdatum	15.05.2024
Seiten	1705-1713
ISBN (elektronisch)	9781644903131
DOIs	https://doi.org/10.21741/9781644903131-189
Publikationsstatus	Erschienen - 15.05.2024
Veranstaltung	27th International ESAFORM Conference on Material Forming - ESAFORM 2024 - Pierre Baudis Convention Center, Toulouse, Frankreich Dauer: 24.04.2024 → 26.04.2024 Konferenznummer: 27 https://esaform24.fr/

Bibliographische Notiz

Publisher Copyright:
© 2024, Association of American Publishers. All rights reserved.

Fachgebiete und Schlagwörter

Ingenieurwissenschaften

Zugriff auf Dokument

10.21741/9781644903131-189Lizenz: CC BY

Dieses zitieren

Shen, T., Fu, B., Chen, T., Suhuddin, U., & Klusemann, B. (2024). Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study. in A. C. Araujo, A. Cantarel, F. Chabert, A. Korycki, P. Olivier, & F. Schmidt (Hrsg.), Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024 (S. 1705-1713). (Materials Research Proceedings; Band 41). Association of American Publishers. https://doi.org/10.21741/9781644903131-189

Shen, Tong ; Fu, Banglong ; Chen, Ting et al. / Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding : A feasibility study. Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Hrsg. / Anna Carla Araujo ; Arthur Cantarel ; France Chabert ; Adrian Korycki ; Philippe Olivier ; Fabrice Schmidt. Millersville, PA : Association of American Publishers, 2024. S. 1705-1713 (Materials Research Proceedings).

@inbook{5ff13105283144fdbbd02e47c0772d50,

title = "Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study",

abstract = "The main objective of this study was to assess and enhance the weldability of AA6016- T4 to AlSi-coated press-hardened steel (PHS), with a focus on investigating the impact of the AlSi coating on the mechanical properties of welded joints. Variations in tool rotation speed, dwell time, and plunge speed were performed to observe their effects on the joint behavior. It was observed that the protective AlSi-coating significantly influences the mechanical strength of the welded joint. Notably, the removal of the AlSi coating resulted in a substantial increase in joint mechanical strength. To systematically assess joint lap-shear strength under static loading conditions, Design of Experiment technique was employed. The influence of the process parameters on joint strength was thoroughly evaluated.",

keywords = "Aluminum, Dissimilar Materials Joining Lap-Shear Properties, Refill Friction Stir Spot Welding, Steel, Engineering",

author = "Tong Shen and Banglong Fu and Ting Chen and Uceu Suhuddin and Benjamin Klusemann",

note = "Publisher Copyright: {\textcopyright} 2024, Association of American Publishers. All rights reserved.; 27th International ESAFORM Conference on Material Forming - ESAFORM 2024, ESAFORM 2024 ; Conference date: 24-04-2024 Through 26-04-2024",

year = "2024",

month = may,

day = "15",

doi = "10.21741/9781644903131-189",

language = "English",

series = "Materials Research Proceedings",

publisher = "Association of American Publishers",

pages = "1705--1713",

editor = "Araujo, \{Anna Carla\} and Arthur Cantarel and France Chabert and Adrian Korycki and Philippe Olivier and Fabrice Schmidt",

booktitle = "Material Forming, ESAFORM 2024",

address = "United States",

url = "https://esaform24.fr/",

}

Shen, T, Fu, B, Chen, T, Suhuddin, U & Klusemann, B 2024, Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study. in AC Araujo, A Cantarel, F Chabert, A Korycki, P Olivier & F Schmidt (Hrsg.), Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Materials Research Proceedings, Bd. 41, Association of American Publishers, Millersville, PA, S. 1705-1713, 27th International ESAFORM Conference on Material Forming - ESAFORM 2024, Toulouse, Frankreich, 24.04.24. https://doi.org/10.21741/9781644903131-189

Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study. / Shen, Tong; Fu, Banglong; Chen, Ting et al.
Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Hrsg. / Anna Carla Araujo; Arthur Cantarel; France Chabert; Adrian Korycki; Philippe Olivier; Fabrice Schmidt. Millersville, PA: Association of American Publishers, 2024. S. 1705-1713 (Materials Research Proceedings; Band 41).

Publikation: Beiträge in Sammelwerken › Aufsätze in Konferenzbänden › Forschung › Begutachtung

TY - CHAP

T1 - Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding

T2 - 27th International ESAFORM Conference on Material Forming - ESAFORM 2024

AU - Shen, Tong

AU - Fu, Banglong

AU - Chen, Ting

AU - Suhuddin, Uceu

AU - Klusemann, Benjamin

N1 - Conference code: 27

PY - 2024/5/15

Y1 - 2024/5/15

N2 - The main objective of this study was to assess and enhance the weldability of AA6016- T4 to AlSi-coated press-hardened steel (PHS), with a focus on investigating the impact of the AlSi coating on the mechanical properties of welded joints. Variations in tool rotation speed, dwell time, and plunge speed were performed to observe their effects on the joint behavior. It was observed that the protective AlSi-coating significantly influences the mechanical strength of the welded joint. Notably, the removal of the AlSi coating resulted in a substantial increase in joint mechanical strength. To systematically assess joint lap-shear strength under static loading conditions, Design of Experiment technique was employed. The influence of the process parameters on joint strength was thoroughly evaluated.

AB - The main objective of this study was to assess and enhance the weldability of AA6016- T4 to AlSi-coated press-hardened steel (PHS), with a focus on investigating the impact of the AlSi coating on the mechanical properties of welded joints. Variations in tool rotation speed, dwell time, and plunge speed were performed to observe their effects on the joint behavior. It was observed that the protective AlSi-coating significantly influences the mechanical strength of the welded joint. Notably, the removal of the AlSi coating resulted in a substantial increase in joint mechanical strength. To systematically assess joint lap-shear strength under static loading conditions, Design of Experiment technique was employed. The influence of the process parameters on joint strength was thoroughly evaluated.

KW - Aluminum

KW - Dissimilar Materials Joining Lap-Shear Properties

KW - Refill Friction Stir Spot Welding

KW - Steel

KW - Engineering

UR - https://www.scopus.com/pages/publications/85195895382

UR - https://www.mendeley.com/catalogue/29fa9368-f218-3b20-bcbd-cb821bba6a63/

U2 - 10.21741/9781644903131-189

DO - 10.21741/9781644903131-189

M3 - Article in conference proceedings

AN - SCOPUS:85195895382

T3 - Materials Research Proceedings

SP - 1705

EP - 1713

BT - Material Forming, ESAFORM 2024

A2 - Araujo, Anna Carla

A2 - Cantarel, Arthur

A2 - Chabert, France

A2 - Korycki, Adrian

A2 - Olivier, Philippe

A2 - Schmidt, Fabrice

PB - Association of American Publishers

CY - Millersville, PA

Y2 - 24 April 2024 through 26 April 2024

ER -

Shen T, Fu B, Chen T, Suhuddin U, Klusemann B. Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study. in Araujo AC, Cantarel A, Chabert F, Korycki A, Olivier P, Schmidt F, Hrsg., Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Millersville, PA: Association of American Publishers. 2024. S. 1705-1713. (Materials Research Proceedings). doi: 10.21741/9781644903131-189

Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study

Abstract

Bibliographische Notiz

Fachgebiete und Schlagwörter

Zugriff auf Dokument

Fingerprint

Dieses zitieren